Sunlit terrace with exterior roller shutters over a large opening

Made-to-measure exterior roller shutters

We work exclusively with aluminium exterior roller shutters, built to the size of your opening. Three families cover every situation — from no-work retrofits to new build.

In short A made-to-measure exterior roller shutter is an aluminium shutter fitted outside the window, stopping heat before it reaches the glass. OKJAFE manufactures it in Avanca, Portugal, with a polyurethane-injected 45CE slat, Octoclick locks and an A-OK radio motor, in three families: surface-mounted box, monobloc and traditional RKS. We deliver across Portugal, France and Europe.

The three families of exterior shutter

All three share the same technical base: 45CE polyurethane-injected slat, stapled curtain with PVC end caps, rigid Octoclick locks and an A-OK radio motor on the motorised models.

Surface-mounted shutters
Most popular Applied external box

Surface-mounted shutters

The aluminium box is fixed straight onto the façade or into the reveal, independently of the existing window. It can be fitted at any time, with no interior work — this is our most popular range, for retrofits and new build alike.

Retrofit and new build4 box shapesNo interior work

See this range

Window block

Monobloc shutters

The box is built into the window frame, forming a single window + shutter unit. Reserved for new build, full window replacement and retrofits with external insulation. Less common in Portugal.

New buildInsulated boxFull window replacement

See this range

Monobloc shutters
RKS shutters
For a masonry box

RKS shutters

The shutter fits inside a masonry shutter box — existing, planned at construction, or replacing an old shutter. Only the curtain and the guides remain visible: the façade stays completely clean.

Existing boxBuilt-in boxInvisible integration

See this range

Workbench in the Avanca warehouse, with slats cut to size

Every shutter is cut for your opening. There are no off-the-shelf sizes.

We measure, build in Avanca and test the whole assembly before it leaves the warehouse.

Standard equipment and options

What comes with any exterior roller shutter, whichever family, and what you can add. The motor and switch are included on the motorised models.

45CE polyurethane-injected aluminium slat
45 mm coverage, 9.3 mm thickness
Standard
Rigid Octoclick (Clicksur) locks
Rigid curtain-to-tube link, automatic locking, 200 kg
Standard
Stapled curtain with PVC end caps
Slats joined in the factory and capped at both ends
Standard
45° bevelled box (ST2000)
Standard shape — shorter lead time and lower price
Standard
White on slat, curtain and guides
Standard finish — shorter lead time and lower price
Standard
Normal density 90 kg/m³
Standard — faster and cheaper than 180 kg/m³
Standard
A-OK AM45 radio motor (868.3 MHz)
Included on the motorised shutters, no surcharge
Standard
Magnetic wall switch included
Included in the motor price. Stuck on, no drilling and no cabling
Standard
Aluminium guides with brush seal
Less noise and fewer draughts
Standard
Solar motorisation
Panel and battery built into the box, no wiring
Option
6- or 16-channel handheld remote
Central control of several shutters
Option
Manual operation by strap or crank
For situations with no power available
Option
High density 180 kg/m³
More rigidity and insulation, advised on wide openings
Option
Special colours and wood finishes
20 standard colours; other references on request
Option
Insect screens
Separate range: roll-up, pleated or sliding
Option

Technology · Colours and finishes · How to measure and install

Interior blinds

Roller blinds, Minibox for doors and casement windows, and aluminium Venetian blinds — built to measure in the same workshop, and surveyed on the same visit as the exteriors.

Interior blinds

Frequently asked questions

What is the difference between box, monobloc and traditional RKS shutters?

The box shutter is fixed to the façade or inside the reveal, independently of the window, and is the most popular. The monobloc builds the box into the window frame, for new builds, full window replacement or renovation with external wall insulation (ETICS). The traditional RKS fits into an existing or planned masonry box, with only the curtain and guides visible.

What is included as standard on an exterior shutter?

A polyurethane-injected aluminium 45CE slat, rigid Octoclick locks, a stapled curtain with PVC side stops and aluminium side guides with brush seals. On motorised models, the A-OK AM45 radio motor and the magnetic wall switch are included in the price at no extra cost.

How long until the shutter is installed?

As a guide: 1–2 days for the quote, 10–15 working days of manufacturing in standard colours, 2–5 days of transport in mainland Portugal and 1–2 weeks to schedule installation. In total, three to five weeks in most cases.

Ready to order, or would you rather have a quote?

In the shop, enter your sizes and see the price at once. For a larger project, with installation or several pieces, send us your sizes: we reply within 24 to 48 working hours with a detailed, no-obligation quote.

WhatsApp