How to measure a made-to-measure insect screen
Width and height at three points, always the minimum. Each range has small particularities, summarised here.
In short Measure the opening width and height at three points and use the minimum. For a sliding screen, measure the window leaf (Av) and the free vertical passage (Hv).
The golden rule: three points, smallest value
Measure the opening width and height at three points and always use the minimum. That guarantees a perfect fit and reveals any squareness problem.
What to measure for each range
| Range | Sizes to give |
|---|---|
| ENROLA Easy Fit | W × H of the opening where the screen will sit, 3 points, minimum. |
| PLISSA mini | W × H of the opening, 3 points, minimum. The version (side, 2-leaf, reversible) is chosen by opening type. |
| CORRE | Av = width of the window leaf; Hv = free vertical passage. |
| PRACTIK | W × H of the door opening, 3 points, minimum; state the opening side. |
| FIXE | In the recess: W × H of the opening. On a casement: free horizontal and vertical passage inside the guides; we apply the manufacturing clearances. |
In 4 steps
1. Measure the width
Top, middle and bottom. Note all three; keep the smallest.
2. Measure the height
Left, centre and right. Keep the smallest.
3. Check squareness
Measure both diagonals; if they differ a lot, photograph and send us.
4. Pick the range and enter in the configurator
The configurator validates each range’s maximum sizes and shows the price instantly.
Frequently asked questions
Why use the minimum size?
Openings are rarely perfectly straight. The minimum guarantees the screen fits at every point.
What differs when measuring a sliding window?
For a sliding screen you measure the leaf width and the free vertical passage, not the total opening.