Measuring guide

How to measure a monobloc roller shutter

On a monobloc the box sits above the tunnel, inside the opening. Measure the tunnel, choose the box and add the two heights.

In short On a monobloc measure tunnel width and height at three points (smallest value), pick the 160 or 200 mm box and add it to the tunnel height. Check wall thickness and box access.

The monobloc shutter comes integrated in the window: the box sits above the tunnel (the space where the curtain runs), inside the opening. Measuring therefore has two parts: the tunnel and the box, which add up to the total height.

Front view of the monobloc: tunnel, box above and total heightBox (160 or 200 mm)Tunnel widthTunnel heightTotal height = tunnel + box

Before you start

  • Decide whether the window is supplied by us (complete monobloc) or by another supplier: in that case give the make and profile in the request so we can check compatibility.
  • Metal tape, level and paper. Everything in millimetres.
  • Take photos of the opening, inside and out, with the tape visible.

How to measure, step by step

  1. 1. Tunnel width

    Measure the clear width between the reveals at three heights (top, middle, bottom) and use the smallest. That is the useful width the curtain passes through.

  2. 2. Tunnel height

    From the sill (or floor) to the underside of the lintel — or of the existing box — at three points: left, centre and right. Again the smallest value.

  3. 3. Box: 160 or 200 mm

    The box comes in 160 and 200 mm; the shutter height decides the roll diameter and so the box needed. Total height = tunnel height + box. If the space above the tunnel is tight, tell us: we check before producing.

  4. 4. Wall thickness and insulation

    Measure the wall thickness at the opening. The box must fit the thickness; with external insulation (ETICS) include the insulation thickness too.

  5. 5. Box access and cable exit

    There are two versions: Thermo CC, with a rear inspection hatch, and Thermo TL, with a bottom inspection hatch. Check where there is room to open it and where the power socket is.

Frequently asked questions

What is the tunnel of a monobloc shutter?

It is the space between the reveals where the curtain descends. The box sits above it.

How do I choose between a 160 and a 200 mm box?

It depends on the shutter height, which sets the roll diameter. We specify the right box when confirming sizes.

Can I fit a monobloc to a window I already have?

The monobloc comes joined to the window. If you already ordered the window elsewhere, give the make and profile in the quote request so we can check compatibility.

Ready to order, or would you rather have a quote?

In the shop, enter your sizes and see the price at once. For a larger project, with installation or several pieces, send us your sizes: we reply within 24 to 48 working hours with a detailed, no-obligation quote.

WhatsApp