Surface-mounted roller shutters
Our most popular range. It can be fitted at any time, independently of the existing window.
In short The exterior box shutter is fixed directly to the façade or inside the reveal, without depending on the window or any interior work, so it can be fitted at any time. It is made of aluminium, with a 45° bevelled box (the standard shape, the quickest and cheapest), quarter-round, round or ETICS box, and can include an integrated roll-up insect screen.
Surface-mounted shutters — also called applied or retrofit shutters — are fixed straight onto the façade or into the reveal, without depending on the window. That makes them the most sensible solution both for retrofits and for improving the energy performance of a home that is already built.
They are made from aluminium for rigidity, weather resistance and long life, and come in a wide choice of box shapes, profiles and colours, so the result sits properly on any façade.
A genuine extra layer on the building
- Better thermal insulation, cutting heat loss in winter and overheating in summer
- Less daylight and solar radiation, by lowering the shutter partly or fully
- Stronger protection against break-ins thanks to the Octoclick attachments fitted as standard
- Optional retractable insect screen built into the box, without spoiling natural ventilation
It is the shape we build most and keep in permanent production. Choosing it means a shorter lead time and a lower price than any of the other three — and it is also the model the future online shop will sell. The quarter-round, round and ETICS boxes remain available whenever the façade calls for them.
White (reference 102) and the normal 90 kg/m³ density are our standard choices: material always in stock, faster production and a lower price. The other 19 colours, the wood finishes, special RAL shades and the high 180 kg/m³ density remain available, with the extra lead time and cost set out in the quote.
Four box shapes
The choice is mostly aesthetic — all of them give the same access to the tube for maintenance and share the same technical base. Pick a tab to see the versions and installation types for each box.
45° bevel box Reference ST2000 Standard
Front angled at 45°, visually reducing the height of the box. The most versatile shape in the range — the only one that also allows a reveal fitting with the box inverted.
The model

Installation types



Quarter-round box Reference RL2000
Front with a quarter curve. A middle ground between the discretion of the round box and the straight lines of a contemporary façade.
The model

Installation types


Round box Reference OS2000
Fully curved front, discreet and classic. Sits naturally on traditional façades and older houses.
The model

Installation types


ETICS box Reference IT2000
Designed for façades with external thermal insulation: the box sits within the thickness of the insulation and becomes almost invisible once rendered.
The model

Installation types

Standard equipment and options
What comes with any exterior roller shutter, whichever family, and what you can add. The motor and switch are included on the motorised models.
| 45CE polyurethane-injected aluminium slat 45 mm coverage, 9.3 mm thickness |
Standard |
|---|---|
| Rigid Octoclick (Clicksur) locks Rigid curtain-to-tube link, automatic locking, 200 kg |
Standard |
| Stapled curtain with PVC end caps Slats joined in the factory and capped at both ends |
Standard |
| 45° bevelled box (ST2000) Standard shape — shorter lead time and lower price |
Standard |
| White on slat, curtain and guides Standard finish — shorter lead time and lower price |
Standard |
| Normal density 90 kg/m³ Standard — faster and cheaper than 180 kg/m³ |
Standard |
| A-OK AM45 radio motor (868.3 MHz) Included on the motorised shutters, no surcharge |
Standard |
| Magnetic wall switch included Included in the motor price. Stuck on, no drilling and no cabling |
Standard |
| Aluminium guides with brush seal Less noise and fewer draughts |
Standard |
| Solar motorisation Panel and battery built into the box, no wiring |
Option |
| 6- or 16-channel handheld remote Central control of several shutters |
Option |
| Manual operation by strap or crank For situations with no power available |
Option |
| High density 180 kg/m³ More rigidity and insulation, advised on wide openings |
Option |
| Special colours and wood finishes 20 standard colours; other references on request |
Option |
| Insect screens Separate range: roll-up, pleated or sliding |
Option |
Technology · Colours and finishes · How to measure and install · Insect screens
Heat is stopped outside the glass.
That is the difference between an exterior shutter and a curtain: one blocks the heat, the other only hides it.
Frequently asked questions
Which box shape should I choose?
The 45° bevelled box is the standard shape: it is the most manufactured, with the shortest lead time and lowest price. The other three (quarter-round, round and ETICS) are mainly aesthetic choices, with the same access to the tube for maintenance and the same technical base.
Can it be fitted to an existing window without building work?
Yes. The aluminium box is fixed directly to the façade or inside the reveal, independently of the window and without interior work, which makes it the most practical option for renovation.
Can an insect screen be built into the box?
Yes. A version with a roll-up insect screen integrated in the box is available, without hindering natural ventilation.
See also
- Exterior roller shutters made to measure
- Monobloc shutters for new builds
- Traditional RKS shutters for masonry boxes
- Technical data: 45CE slat, Octoclick and A-OK motor
- Available colours and finishes
- Insect screens made to measure
- Request a free quote
- How to measure an external roller shutter, surface-mounted or on the frame
- How much does an external roller shutter cost