
Surface-mounted on the façade
The box and guides fix to the façade above and at each side of the opening, independent of the window. It is the commonest renovation solution. We add 53 mm each side (guides) plus the box height.
Three measurements and one check are enough: width, height, squareness and free space. We cover surface-mounted on the façade and under-lintel fixing on the window frame.
In short Measure the opening at three points in width and height and use the smallest value; check the diagonals and free space. For surface-mounted fixing the shutter is made 106 mm wider (guides) and taller by the box height.
In our online shop you always enter the opening size (the visible opening) and the fixing type; we add what the fixing needs. There are three situations.

The box and guides fix to the façade above and at each side of the opening, independent of the window. It is the commonest renovation solution. We add 53 mm each side (guides) plus the box height.

The box sits inside the opening (tunnel) under the lintel and the guides fix to the reveals or frame. No width is added: the shutter is made to the opening size and the box takes up part of the height.

A variant of the previous one with the box inverted, when the space under the lintel requires it. The measurements are the same; tell us when ordering and we confirm the fit.
Measure the width at the top, middle and bottom. Note all three and use the smallest.
Measure from the highest point of the opening (or the lintel) to the sill or finished floor, at left, centre and right. Again, the smallest value.
Measure both diagonals. If they differ by more than about 5 mm the opening is out of square: tell us, the guides will have to compensate.
| Fixing | What to check | Size added |
|---|---|---|
| Surface-mounted | 53 mm free each side of the opening; free height above for the box; eaves, gutters, pillars or external insulation (ETICS) that limit depth. | Width: W + 106 mm · Height: H + box |
| Under the lintel | Reveal deep enough for the box; opening tall enough for box plus window; nothing obstructing the guides. | None: the shutter is made to the opening size |
Box height runs from about 150 to 205 mm depending on the curtain height (indicative values: the configurator shows the exact size and final confirmation is made when ordering).
Opening of 1200 × 1300 mm surface-mounted: we make 1306 × 1450 mm (1200 + 2 × 53 wide; 1300 + a 150 mm box high). The configurator shows that made size before you add to cart.
On motorised shutters choose the cable side according to where the power socket is. Solar models need no mains cable. If unsure, photograph the socket position.
The opening, i.e. the visible aperture where the shutter will run. For surface-mounted we add the guides and box ourselves.
Enough for the box, about 150 to 205 mm depending on shutter height. The configurator shows the exact size.
Surface-mounted puts box and guides on the façade, added to the opening size. Under-lintel keeps them inside the opening so the size does not grow.
In the shop, enter your sizes and see the price at once. For a larger project, with installation or several pieces, send us your sizes: we reply within 24 to 48 working hours with a detailed, no-obligation quote.