Monobloc roller shutters (window block)
A single window + box unit, for new build and full window replacement.
In short The monobloc shutter builds the box into the window frame, forming a single window + shutter unit. It suits new builds, full window replacement and renovation with external thermal insulation (ETICS). The box is insulated with high-density polystyrene, which limits thermal bridges at the lintel. In Portugal it is less common than the surface-mounted box shutter.
The monobloc shutter is built directly into the window frame and forms a single window + box unit, optimised for new build, full window replacement or retrofits with external thermal insulation (ETICS). In Portugal it is less common than the applied external box, but it is the best-performing solution when the window is being replaced at the same time.
Available in a wide choice of colours and finishes, it gives perfect visual continuity between the window and the façade.
Stronger thermal performance
The box is insulated with high-density polystyrene, which limits thermal bridging at the lintel — the usual weak point of an opening fitted with a shutter. The curtain is made of aluminium slats injected with polyurethane foam, improving insulation and adding comfort in both winter and summer. The whole unit delivers a measurable gain in the overall performance of the opening.
- 45 mm effective coverage · 9.3 mm thickness
- 0.23 mm lacquered aluminium with polyurethane filling
- Normal density (90 kg/m³) or high density (180 kg/m³)
Technical models
Three configurations, differing in how the box is accessed for maintenance and whether an insect screen is built in.
Monobloc Thermo CC 160 mm and 200 mm boxes
Box with a rear inspection hatch. The standard configuration, suitable for most openings.



Monobloc Thermo TL 160 mm and 200 mm boxes
Box with a bottom inspection hatch, leaving the rear face free so extra internal insulation can be added.



A coherent solution combining energy performance, architectural integration and straightforward installation.
The monobloc shutter arrives attached to the window frame. If you already have a window on order from another supplier, tell us the brand and profile in your quote request: we check compatibility before manufacturing.
Included as standard on every shutter, at no extra cost: rigid Octoclick locks with anti-lift locking, stapled curtain with PVC end caps, aluminium guides with brush seal and a magnetic wall switch.
Every shutter is cut for your opening. There are no off-the-shelf sizes.
We measure, build in Avanca and test the whole assembly before it leaves the warehouse.
Frequently asked questions
When does a monobloc make sense?
When the window is being replaced entirely, in a new build or a renovation with external insulation (ETICS). If you are keeping your current window, a surface-mounted box shutter is usually the better fit.
Can I use a monobloc with a window from another supplier?
The monobloc arrives integral with the window frame. If you have already ordered a window from another supplier, give us the brand and profile in your quote request: we check compatibility before producing.
Does a monobloc insulate better?
The box is insulated with high-density polystyrene, which limits thermal bridges at the lintel, and the curtain uses aluminium slats injected with polyurethane, which improve the insulation of the whole unit.